Engineering & Design
-
0Abberton Reservoir Scheme
To meet water resource requirements in the future, Essex & Suffolk Water implemented a scheme to increase the storage capacity at their existing reservoir at Abberton, from 26 to 41 billion liters of water. The scheme was designed to minimise impact on the environment and improve amenity and ecological habitats.
-
0Albany Park Stormwater Diversion Tunnel
Construction will begin for a stormwater diversion tunnel that MWH was retained to design in order to alleviate the chronic, damaging flooding in the Albany Park neighborhood in the City of Chicago.
-
0AMP Hydropower Projects - Cannelton, Smithland, Willow Island, Meldahl
MWH Global is engineering the largest deployment of clean, renewable run-of-river hydroelectric generation in the U.S. MWH Global was selected by AMP in 2007 to serve as Owner’s Engineer for the design and construction management of four new hydroelectric projects at existing Federal dams on the Ohio River. MWH is concurrently providing resident engineering during the […]
-
0Anaheim Water Recycling Demonstration Facility
The City of Anaheim selected MWH to plan and design a new water recycling facility to demonstrate how urban developers can utilize low impact development features in any location. The Water Recycling Demonstration Facility (WRDF), which consists of a Membrane Bioreactor (MBR), ozonation and UV disinfection, illustrates how six separate water sustainable features are used […]
-
0Anaheim Water Recycling Demonstration Project
The City selected MWH, now part of Stantec, to design the Water Recycling Demonstration Facility (WRDF), which will consist of a membrane bioreactor system, ozonation and UV disinfection. The WRDF was built in two phases with an ultimate treatment capacity of 100,000 gpd. Phase 1 of the project consisted of designing and building a 50,000 […]
-
0
Arrow Lakes Hydroelectric Project
MWH provided comprehensive engineering, design and services during construction for the award-winning Arrow Lakes Hydroelectric Project, a design-build project that included a 170 MW powerhouse in southern British Columbia, Canada. Located on the Columbia River, the project was constructed on the north side of the existing Hugh Keenleyside Dam, which was completed in 1969 without […]
-
0Aurora Prairie Waters Project
MWH was responsible for planning, preliminary design, final design and services during construction, PLC programming, startup and commissioning and warranty support for the $160 million, 50 mgd raw water conveyance system as part of the Aurora Prairie Waters project. The conveyance system includes 34 miles of raw water conveyance piping with a diameter of 60 […]
-
0
Australia Pacific LNG Water Treatment Facility
MWH has been appointed by Origin Energy to provide detailed design services for two proposed water treatment facilities as part of the Australia Pacific LNG project. The Australia Pacific LNG project is a 50:50 joint venture between Origin and ConocoPhillips and incorporates the upstream gas and water gathering and treatment facilities, which are the first stage of […]
-
0
Bamford WTW - Treatment Enhancements Project
Increasing raw water color from the reservoir catchments, associated with higher intensity rainfall events (believed to be linked with global warming), have put the existing clarification processes under increasing challenge. In order to future proof the works against this, a substantial enhancement project has been undertaken over the past three years (2009 to 2012). A […]
-
0
Beneficial Reuse in the Surat Basin
The treatment and reuse of associated water produced as a byproduct of coal seam gas extraction is both an issue and opportunity for oil and gas exploration and production companies. MWH Global is applying our knowledge of water treatment principles, in combination with our water resources and agricultural expertise, to partner with these companies to […]